Outdoor Up Lighting For Trees

Photos & Products McKay Landscape Lighting Save Photo A combination of lighting techniques are used at this front entry; uplights mounted in the planting bed illuminate the large shade tree; path lights installed along the edge of the pavement illuminate the ground plane; fixtures mounted in the eaves cast a wash of light downward on the brick face of the house. Night Light, Inc. Save Photo The technique of uplighting, can add depth to the landscape and create dramatic appeal when viewed from a distance. McKay Landscape Lighting Save Photo For deciduous trees – shade trees, flowering trees and the like, this is most often achieved with a ground-mounted fixture aimed upward at the trunk and branches of a tree. Harmony Design Group Save Photo How many fixtures are needed depends on the size of the tree and how much coverage is desired. C.O.S Design Save Photo If trees, or tall bamboo in this example, are being considered for uplighting it is important to leave enough room for the placement of the fixture. Moonlighting Landscape Lighting Systems Save Photo The amount of space is dependent on the type and size of the tree. Viewpoint Lighting Save Photo Uplighting deciduous trees shows off their bark and branching structure very effectively. It works on “single-leader” trees (otherwise referred to as “on-standard”)as well as on “clump” or “multi-stem” trees. Select trees of specimen-quality form for this lighting application. Night Light, Inc. Save Photo Uplighting a small clump-form tree/multi-stemmed tree, and two dwarf “on-standard” (single-leader) trees. Path lights illuminate the stone steps. Night Light, Inc. Save Photo Evergreen trees, Spruce, Pine, Fir, etc., need to be illuminated from further outside the tree in order to have even coverage across the full width and height of the tree. Katy Allen, Nella Designs Save Photo Therefore more space is needed around the tree to allow for light to reach the top without interference from the lower limbs. Rugo/ Raff Ltd. Architects Save Photo Sometimes the trees are too close to a patio, walk, driveway, walls, etc., to adequately illuminate them with a ground-mounted fixture. In that case, perhaps the tree can be lit with a fixture placed in some nearby structure. Ginkgo Leaf Studio Save Photo To light trees set out in the lawn, a mulch ring around the base of the tree is needed for the ground-mounted fixture. Lite4 Outdoor Lighting Save Photo Trees planted closer to the building – within the foundation planting bed, can also be uplit as an accent to the rest of the smaller foundation shrubs. Some of the light will project onto the building’s surface as well – highlighting its texture as well. Night Light, Inc. Save Photo Silhouetting is a technique of lighting a wall or other structure immediately behind a tree so that the tree is seen in dark silhouette against an illuminated background. Smooth or light-colored surfaces work best for this technique in order to achieve a strong and sharply defined silhouette. Night Light, Inc. Save Photo If the shade tree is large enough (minimum 3″ caliper at 15′ height) the tree could be a candidate for downlighting or moonlighting. This type of lighting has the fixture mounted high up in the trunk and branches – casting patterns downward through the branches and leaves to create interesting shadow effects on the ground and other surfaces.outdoor up lighting for trees 1McKay Landscape Lighting Save Photo A combination of lighting techniques are used at this front entry; uplights mounted in the planting bed illuminate the large shade tree; path lights installed along the edge of the pavement illuminate the ground plane; fixtures mounted in the eaves cast a wash of light downward on the brick face of the house. Night Light, Inc. Save Photo The technique of uplighting, can add depth to the landscape and create dramatic appeal when viewed from a distance. McKay Landscape Lighting Save Photo For deciduous trees – shade trees, flowering trees and the like, this is most often achieved with a ground-mounted fixture aimed upward at the trunk and branches of a tree. Harmony Design Group Save Photo How many fixtures are needed depends on the size of the tree and how much coverage is desired. C.O.S Design Save Photo If trees, or tall bamboo in this example, are being considered for uplighting it is important to leave enough room for the placement of the fixture. Moonlighting Landscape Lighting Systems Save Photo The amount of space is dependent on the type and size of the tree. Viewpoint Lighting Save Photo Uplighting deciduous trees shows off their bark and branching structure very effectively. It works on “single-leader” trees (otherwise referred to as “on-standard”)as well as on “clump” or “multi-stem” trees. Select trees of specimen-quality form for this lighting application. Night Light, Inc. Save Photo Uplighting a small clump-form tree/multi-stemmed tree, and two dwarf “on-standard” (single-leader) trees. Path lights illuminate the stone steps. Night Light, Inc. Save Photo Evergreen trees, Spruce, Pine, Fir, etc., need to be illuminated from further outside the tree in order to have even coverage across the full width and height of the tree. Katy Allen, Nella Designs Save Photo Therefore more space is needed around the tree to allow for light to reach the top without interference from the lower limbs. Rugo/ Raff Ltd. Architects Save Photo Sometimes the trees are too close to a patio, walk, driveway, walls, etc., to adequately illuminate them with a ground-mounted fixture. In that case, perhaps the tree can be lit with a fixture placed in some nearby structure. Ginkgo Leaf Studio Save Photo To light trees set out in the lawn, a mulch ring around the base of the tree is needed for the ground-mounted fixture. Lite4 Outdoor Lighting Save Photo Trees planted closer to the building – within the foundation planting bed, can also be uplit as an accent to the rest of the smaller foundation shrubs. Some of the light will project onto the building’s surface as well – highlighting its texture as well. Night Light, Inc. Save Photo Silhouetting is a technique of lighting a wall or other structure immediately behind a tree so that the tree is seen in dark silhouette against an illuminated background. Smooth or light-colored surfaces work best for this technique in order to achieve a strong and sharply defined silhouette. Night Light, Inc. Save Photo If the shade tree is large enough (minimum 3″ caliper at 15′ height) the tree could be a candidate for downlighting or moonlighting. This type of lighting has the fixture mounted high up in the trunk and branches – casting patterns downward through the branches and leaves to create interesting shadow effects on the ground and other surfaces.outdoor up lighting for trees 2Up-lighting – Offering a greater contrast effect than typical wall-washing, spotlight fixtures are placed closer to a building for a bolder effect. Moonlighting – Create moonlighting techniques by placing a large fixture with a full glare guard high up inside a tree, and angled downwards. This effect looks like moonlight shining down through the branches. It causes attractive shadow patterns on the ground to appear, plus it provides a very natural and beautiful lighting effect. Down-lighting – The down-lighting technique is similar to the moonlighting technique, although brighter and less subtle. Place a fixture high up, inside a feature like a trellis, tree, or eave, and cast downwards over a large area. Place the light higher if you intend to illuminate a large portion of the yard, and lower if you wish to illuminate a path or garden. Accenting – Any lighting that draws special attention to a specific feature is considered accent lighting. Specifically angled up-lighting or down-lighting can be used as accent lighting, to point out an architectural design, plant, or other feature. Try using a narrow beam spotlight from a hidden fixture to add a flair of mystery to your accent lighting. Path-lighting – Path-lighting is created by placing small fixtures along the borders of walkways, driveways, and patios. It is important that the style of these path lights be considered carefully. It is also important to be sure that they are positioned to illuminate the path, but also placed so that they avoid being kicked, moved, or getting in the way of the lawnmower. Shop for Landscape Lighting Fixtures Back to Landscape Lighting Learning Centeroutdoor up lighting for trees 3Thoughtful placement of key trees in the landscape can set the stage for a dynamic nighttime effect using several lighting techniques. Most trees in the landscape are illuminated using the techniques of uplighting, silhouetting and moonlighting. The type of fixture, the type and intensity of the bulb, the beam spread, and the color temperature of the light (cool to warm) also affect the quality and character of the landscape lighting. Below are examples of the three types of lighting techniques that will showcase the beauty of your trees – both big and small.outdoor up lighting for trees 4Correct lighting techniques will highlight your important features and create the perfect amount of drama in a yard. Find out what techniques work best for your home’s architectural features, garden accents, outdoor living spaces, or backyard oasis. Highlighting – This is a common and quite useful technique in outdoor lighting. Highlighting is created by placing a spotlight at the base of an outdoor feature. By varying the distance and angle of the light fixture, you can experiment with different lighting designs for unique landscape architecture goals. For example, trees often need two or more fixtures to provide sufficient illumination. Silhouetting – By placing a spotlight behind the feature, aimed towards an adjacent wall, you can create an illuminated backdrop. This dark outline of the object is useful for showcasing plants and other dense features. It looks especially striking in the sunset.

Add a Comment

Your email address will not be published. Required fields are marked *